PDA

View Full Version : Error Code Konica minolta c7000p error code c-3501


Custom Search


Polygon
07-28-2015, 08:53 PM
Hi everbody:

im new on konica minolta, my c7000p drop a c-3501 error.
i change the TH1 sensor.
i try to reset the DipSW3-1 to (0) but i dont know how to save the cofiguration
can anyone help me with this

i will be eternally grateful

Mick01
07-30-2015, 12:06 AM
Hi,
You are resetting the correct soft switch. You dont have to "save" anything. Setting the switch to 0 should release the code when the machine is switched off and on.
If the code returns after a while then you have an issue with the fusing unit. Check the heat sleeves/bearings for the upper belt unit. Check the gap between the belt and the temp sensor 1.
Check the state of the upper lamp assembly.
hope this helps

Custom Search