PDA

View Full Version : Error Code BIZHUB C360


Custom Search


Mahmood
08-10-2015, 10:51 AM
Hi
getting error code F-FCC2 any idea.
see the pic30201

allan
08-10-2015, 12:00 PM
That code can't be right.

Mahmood
08-10-2015, 03:53 PM
That code can't be right.

see the pic it is not mention in the manual

allan
08-10-2015, 04:43 PM
HHD, RAM, MFPB.
Does the code reset if you open and close the front door?

Mahmood
08-10-2015, 05:15 PM
HHD, RAM, MFPB.
Does the code reset if you open and close the front door?
no, some time after 20 or 30 minutes if the machine switched on it will be ok no code but if you switch off and on again the code will come and remain even open, close or switched off but the code will not go.

allan
08-10-2015, 06:28 PM
is it plugged into a network?

Mahmood
08-12-2015, 04:48 PM
is it plugged into a network?

no even hd removed but still the code

emujo
08-12-2015, 04:59 PM
This may be one of those counterfeiting prevention codes...you may need to get KM involved (not a dealer). Emujo

Custom Search