Konica 7022 f-41-1

[mrfuser]

I have a client with a few old 7022 and two of them now have f-41-1 codes and won't clear.
Any ideas?

[mrfuser]

Okay, I am guessing that it is a fuse blown somewhere that controls power to the scanner. Anyone know where that fuse is?

Thanks

[Luther]

its more likely the scanner motor that took out the scanner control board, if you can find them replace them as a set, the motor probably took out the scanner board, they are both located under the lens cover under the scan glass

[mrfuser]

Thanks, tried that already no good. I'm sure it is a power issue just can't figure out which line fuse feeds scanner.

[CraigW]

I always Ohm out the ICP fuses soldered to the boards.


Then tack the leads of the replacement fuse across the open ICP, and insulate.