NVRAM Bizhub C353

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jaimeochoam
    Junior Member
    • Aug 2011
    • 6
    #1

    NVRAM Bizhub C353

    Hi, I was traying to repair a defective NVRAM of Bizhub C353 with the firmware Imaging Toolkit. But when the CF card is being written appears the error "failed to open sumfile". The .exe file of this machine that I have to do it is not ok. the CF card is 256MB. I work with Konica Minolta but as independent engineer. I dont have count with mykonicaminolta and the dealer in the country do not help me with this software, can some one help me with the file A02E0Y0-F000-GCQ-J8(00).EXE ?. I really apreciate your help. jaimeochoam@gmail.com
    Tags: None
    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5459
      #2
      Re: NVRAM Bizhub C353

      Originally posted by jaimeochoam
      Hi, I was traying to repair a defective NVRAM of Bizhub C353 with the firmware Imaging Toolkit. But when the CF card is being written appears the error "failed to open sumfile". The .exe file of this machine that I have to do it is not ok. the CF card is 256MB. I work with Konica Minolta but as independent engineer. I dont have count with mykonicaminolta and the dealer in the country do not help me with this software, can some one help me with the file A02E0Y0-F000-GCQ-J8(00).EXE ?. I really apreciate your help. jaimeochoam@gmail.com

      You could try and do an old school repair on it?
      Whatever

        Comment

        • jaimeochoam
          Junior Member
          • Aug 2011
          • 6
          #3
          Re: NVRAM Bizhub C353

          Originally posted by allan
          You could try and do an old school repair on it?
          Sorry I dont undestand. There is another mode? what is it?. I don not have other NVRAM to change it.

            Comment

            Previous template Next
            Working...