View Full Version : Bizhub 500 noise
mrfuser
08-20-2015, 01:22 AM
Client complains about noise on right side near fuser area. Cleaned everything and fuser looks fine but noise comes back. Any ideas?
copier addict
08-20-2015, 01:36 PM
Going by your vague description I would say that somewhere on the right side there are two things rubbing against each other.
CraigW
08-20-2015, 08:32 PM
There is a small coupler/gear pack at the rear side even with registration (4 screws) Remove it and clean up the shafts, and mating gear areas.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.