PDA

View Full Version : KM223 Developer Unit.... or is it ?


Custom Search


agudmove
08-28-2015, 05:00 PM
30437

I was sent this KM223 dev unit from our stores, I don't know what machine it is for but it isn't for a KM223.

The box has the correct part no., there isn't a connector front right of the unit, and the protruding part you see at the rear is a filter.
Has anyone seen this unit before.

CraigW
08-28-2015, 05:18 PM
The connector is there, it is clipped up underneath. And that plenum will go right it the opening in the machine. Yes, vastly different part #.

allan
08-28-2015, 07:42 PM
That toner filter piece was a later addition. I don't think the 282 machines had those?

rrrohan
08-31-2015, 05:47 AM
That toner filter piece was a later addition. I don't think the 282 machines had those?
He said 283 not 282.

Sent from my SM-G900I using Tapatalk

allan
08-31-2015, 05:56 AM
Ok

allan
09-06-2015, 05:15 PM
30437

I was sent this KM223 dev unit from our stores, I don't know what machine it is for but it isn't for a KM223.

The box has the correct part no., there isn't a connector front right of the unit, and the protruding part you see at the rear is a filter.
Has anyone seen this unit before.


Figured it out yet?
If the TD sensor is missing there would be no connector.
And if there is no block connector on the back its not for the older machines.

agudmove
09-14-2015, 04:09 PM
No, sent the part back, I'll figure it out next time.

rrrohan
09-14-2015, 04:26 PM
No, sent the part back, I'll figure it out next time.
Jee didn't try very hard.

Sent from my SM-G900I using Tapatalk

CraigW
09-14-2015, 05:28 PM
I just recently put one of those into a 36.

Threw me at 1st with the all new part # and all.

Custom Search