PDA

View Full Version : Konica Minolta Bizhub C253 Amber light keeps flashing around the start key


Custom Search


Alex1
09-03-2015, 08:44 AM
Hi,

i have a Konica Minolta Bizhub C253 Amber light keeps flashing around the start key. Prior to that the machine had a C5102 error I pulled the back apart slid the boards to the left, let the plate swing down, I replaced the Transport Motor. Put it all back together then the machine is ready but Amber light won't stop flashing around the start key.

i checked the meter reading on the machine it reads 177131. Then I open the front panel and the analog reading reads 177129. I don't think that has anything to do with it as I had a Bizhub C280 that's was reading 300000 pages on the analog and 50,000 on the digital.

any help will be much appreciated.

EarthKmTech
09-03-2015, 09:09 AM
Machine on csrc ?

Start button flashing usually means its in maintenance mode.

if not, somethings screwed.

Alex1
09-03-2015, 09:26 AM
Machine on csrc ?

Start button flashing usually means its in maintenance mode.

if not, somethings screwed.


The machine isn't on CSRC.

Its not in service mode either

copier addict
09-03-2015, 01:25 PM
Since you were moving boards, I would check all connectors on PRCB. I'm guessing one is not connected. Start with CN37.

Hansoon
09-03-2015, 01:52 PM
http://www.copytechnet.com/forums/konica-minolta/99059-bh-c-253-print-button-blinks-orange.html?highlight=

Hans

Alex1
09-03-2015, 02:11 PM
Since you were moving boards, I would check all connectors on PRCB. I'm guessing one is not connected. Start with CN37.

thank you for your help. I discovered earlier it was the CN37 it wasn't plugged in properly.

Custom Search