PDA

View Full Version : konica 282 NTLM


Custom Search


DPSolutions
09-03-2015, 10:01 AM
It possible to activate NTLM v1/v2 on konica 282?

emujo
09-03-2015, 01:57 PM
Yes, KM released firmware for this several years ago...but you have to be careful, there are separate files depending on which phase MFP you have..
Version PHASE_2_ONLY_G11-06 9/29/2009


9/29/2009 19.53 MB 222 282 362 A11U-0100-G11-06-002.exe (http://onyxftp.mykonicaminolta.com/DownloadFile/Download.ashx?fileversionid=1667&productid=1180)
Release Notes: bizhub 222, 282, 362 PHASE 2 ONLY Special MFP Firmware Version G11-06

CAUTION: You CANNOT upgrade Phase 1.0 machines to Phase 2.0 level firmware

Phase 2 serial number cut in:

From "A11W011002051" onward => bizhub 222 Phase2
From "A11V011001338" onward => bizhub 282 Phase2
From "A11U011001706" onward => bizhub 362 Phase2

Serial numbers below are Phase 1 systems.

Version PHASE_1_ONLY_G05-09 9/29/2009


9/29/2009 11.25 MB 222 282 362 A11U-0100-G05-09-002.exe (http://onyxftp.mykonicaminolta.com/DownloadFile/Download.ashx?fileversionid=1666&productid=1180)
Release Notes: bizhub 222, 282, 362 PHASE 1 ONLY Special MFP Firmware Version G05-09

CAUTION: You CANNOT upgrade Phase 1.0 machines to Phase 2.0 level firmware

Phase 2 serial number cut in:

From "A11W011002051" onward => bizhub 222 Phase2
From "A11V011001338" onward => bizhub 282 Phase2
From "A11U011001706" onward => bizhub 362 Phase2

Serial numbers below are Phase 1 systems.

The firmware listing are not links...You are on your own to get the files...Emujo

DPSolutions
09-04-2015, 08:49 AM
My MFP is a phase 2.
I upgraded the firmware. Where can I find the new option to be activated? In the Web portal I can not find it.

DPSolutions
09-04-2015, 11:26 AM
There is a soft switches to edit maybe?

emujo
09-04-2015, 03:52 PM
NTLM 1/2 is added with this firmware, no switches to set. Maybe you have another issue. Emujo

Custom Search