PDA

View Full Version : Bizhub 654


Custom Search


manuelcorrea
09-04-2015, 09:51 PM
I have a BH 654 with a little over 900,000 copies. Took out tray 4 feed section to change rollers & small clutches now I can't get it to feed even one sheet. Counts jams as 14-01. Tried feed section on another machine & it works good. Tried with other feed sections on this one and same problem. Was working before I took it out to rebuild. Anyone have ideas ?

copier tech
09-04-2015, 10:20 PM
Check for bent pins on the machine side, if you know the feed unit you removed works, maybe a pin was bent when you removed/fitted it back

rrrohan
09-05-2015, 05:28 AM
ive never bothered changing clutches in feed assy on this model, just only do the rollers. I have a 754e thats over 2 million still going strong

manuelcorrea
09-06-2015, 12:13 AM
thanks for the reply copier tech , will check for bent pins early next week

3boydad
09-06-2015, 05:34 PM
ive never bothered changing clutches in feed assy on this model, just only do the rollers. I have a 754e thats over 2 million still going strong

you should always change the oneways at the very least. clutches do go out and you will get call back after call back because it wont jam everytime. replace those cheap parts

HoonBoy
09-06-2015, 10:08 PM
My guess is you stretched the separation spring too much while replacing the separation roller...

3boydad
09-06-2015, 10:24 PM
My guess is you stretched the separation spring too much while replacing the separation roller...

agrre i have seem registration issues.do single copy and open it during the process. you should find it.

EarthKmTech
09-06-2015, 11:11 PM
other thing that I've had happen too many times to forget is paper being mashed into the socket at the back of the trays 3 & 4. Sometimes it is difficult to tell if there is paper in there take a very close look.

rrrohan
09-07-2015, 02:40 AM
I'm told the new series allow customer to easily remove paper tray which should help avoid jams behind trays

Sent from my SM-G900I using Tapatalk

EarthKmTech
09-07-2015, 09:26 AM
I'm told the new series allow customer to easily remove paper tray which should help avoid jams behind trays


There goes about 50% of the workforce.

rrrohan
09-07-2015, 09:34 AM
There goes about 50% of the workforce.
Nah I figure it will just make it 2 minutes faster for us to do for them let's be realistic

Sent from my SM-G900I using Tapatalk

manuelcorrea
09-07-2015, 09:04 PM
don't think its the sep. spring because feed section works well on other machine

Custom Search