PDA

View Full Version : Biz Hub 654


Custom Search


antone
09-18-2015, 03:03 PM
Error 9401 lamb...anything to add ...not sure on parts!

copier addict
09-18-2015, 03:10 PM
Trouble type Exposure LED lighting failure
Trouble code C9401
Rank A
Detection timing The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment.
Trouble isolation Scanner
Relevant electrical parts • LED exposure unit (LU201)
• Flat cable (LED exposure unit)
• CCD board (CCDB)
• Scanner drive board (SCDB)
• Printer control board (PRCB)
• MFP board (MFPB

splblazer91
09-18-2015, 08:55 PM
Replace CCD assy. This is a common issue. Good Luck getting one they are on BO so many of these are failing.

blackcat4866
09-18-2015, 10:07 PM
Replace CCD assy. This is a common issue. Good Luck getting one they are on BO so many of these are failing.

Sure, clean the white reference and optics. Then when that doesn't fix it, replace the CCD. I've seen a couple myself.

Now explain to me about the lamb.

30675

=^..^=

EarthKmTech
09-18-2015, 11:47 PM
Replace CCD assy. This is a common issue. Good Luck getting one they are on BO so many of these are failing.


here they are a controlled item - when ordered you're given the 3rd degree, have you tried this this and this first ? But generally are supplied in a timely fashion when answering yes, i know wtf I am doing.

antone
08-26-2016, 02:56 PM
here they are a controlled item - when ordered you're given the 3rd degree, have you tried this this and this first ? But generally are supplied in a timely fashion when answering yes, i know wtf I am doing.
You have part number

Sent from my SM-N920V using Tapatalk

Custom Search