PDA

View Full Version : bizhub 161f restar itself


Custom Search


mazskingdom
06-03-2008, 04:35 PM
Good morning

Could you guys help me out please - this little guy when I turn it on it start to do the warm up - moves the rollers, test the scanner light for about 8 sec and after just a click and shuts off and restart the procedure again - of course no print or copy can be done and no error code. Any hint or idea would be well appreciated - thanks

rocky246
06-04-2008, 12:20 AM
Need to replace PWB-P. #4980-1019-01.

mazskingdom
06-04-2008, 03:00 AM
Thank you

mazskingdom
06-14-2008, 12:15 AM
Ive tried to change that board - still the same now it is even wont start and restart itself but just clicking. If I turn it off for a period of time it is starts the boot sequence but after just clicking. Any other idea? -I have heard it is a very common problem with this machines and nobody knew the solution yet. Something probably overheating but no idea yet what it is
please help if anyone have any idea
thanks

Ronald
06-26-2008, 09:41 AM
We have endless problems with these models. We have tried all but with no success. We now remove the PCL controller and use the B160F Driver. The only success.

:cool:

Custom Search