PDA

View Full Version : [Help] Problem Bizhub 652 b/n


Custom Search


CopiersHouse
09-27-2015, 01:11 AM
Hello, Well I'm a technician and this oportunidada me out a mistake that I still have a Bizhub 652 B / N


First mistake : comes out as a red line around the panel.
Second mistake : I print a copy test and I get all lines in copy and print .
To review ?: Review the cylinder , strip , Laser, loose connectors (There was nothing all good) and no clean plates also look good panel and all is well
Apparently it is an update of the go
I hope I can clarify my doubts.
3076030761

marvin_PL
09-27-2015, 09:50 AM
Hi,
I had similar problem i c353. i think mfp board needs to be replaced (this with memory)

EarthKmTech
09-27-2015, 09:57 AM
yep, corruption of the image processing memory - unfortunately the chips that are soldered to the MFP board.

CopiersHouse
09-28-2015, 12:51 AM
If I upgrade the firmware will be possible to fix it?

EarthKmTech
09-28-2015, 05:38 AM
No.

In my experience MFP board replacement has been required on every single instance of this defect.

Custom Search