davida
06-04-2008, 03:18 AM
I recently acquired a FS-9500DN with a PF-75 3000-sheet feeder. The PF-75 was jamming, so I disassembled, cleaned, and reassembled it. But when I reassembled it, I realized I may have mixed up the lower and upper separation rollers. One is yellow, the other aqua, and they have no part numbers to distinguish them. It may not matter, but I'd like to put them back correctly if possible.
So, if you have a PF-75, open the side door. You will see two translucent rollers, one yellow and one aqua in color. Please tell me which is the upper, and which is the lower color.
Thanks!
David
So, if you have a PF-75, open the side door. You will see two translucent rollers, one yellow and one aqua in color. Please tell me which is the upper, and which is the lower color.
Thanks!
David