View Full Version : Reset All Chips?
M3HR4N
10-07-2015, 06:40 PM
hello people.Recently i heard there's some codes in software switches that reset all chips & life of imaging units in C451 & C452 series. Is it possible? How?Thanks In Advance.
copier addict
10-07-2015, 06:57 PM
You have to be an authorised Konica Minolta service tech and you can download the appropriate firmware from KonMin
emujo
10-07-2015, 06:57 PM
Just do a search for PPLM or IU life...this has been covered about a dozen times..Emujo
M3HR4N
10-08-2015, 06:18 AM
Well i'm afraid i can't access to that special firmware or buy it in my country :(
Tnx for your guidance.
allan
10-08-2015, 07:40 AM
Just buy the chips then. The firmware does not reset it, it just ignores the end of life condition.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.