PDA

View Full Version : Dead Machine Fusing Unit broke 3 times in one year BIZHB 1060L


Custom Search


almagonx
10-07-2015, 11:48 PM
Hello

First, excuse my English.

Someone could explain why im having these problems. You can see the photo of the last scratch . the two times before was worse.

When we do a heavy use for a days the problem returns...

Technical service change the unit but we are worried. We bought the printer only one year ago.

Thanks for your comments.

fajdoooo
10-27-2015, 07:34 PM
You need to replace the whole fixing unit. Then it gona be OK.


Hello

First, excuse my English.

Someone could explain why im having these problems. You can see the photo of the last scratch . the two times before was worse.

When we do a heavy use for a days the problem returns...

Technical service change the unit but we are worried. We bought the printer only one year ago.

Thanks for your comments.

allan
10-27-2015, 09:25 PM
Looks chewed by a screw.

fajdoooo
10-27-2015, 11:03 PM
There is a problem in design of a FU. Now the problem was solved if you get the new FU.


Looks chewed by a screw.

Custom Search