PDA

View Full Version : Jamming Needs parts listed in KM Bulletin #5505


Custom Search


rdyjnkns
10-14-2015, 06:16 AM
I need the information as to where I can obtain the following parts listed in KM Bulletin #5505. They are the spacer (p/n 4030P00200) and the new style lever (p/n 4030301103). Any assistance would be appreciated.

minimerlin
10-14-2015, 08:08 AM
I need the information as to where I can obtain the following parts listed in KM Bulletin #5505. They are the spacer (p/n 4030P00200) and the new style lever (p/n 4030301103). Any assistance would be appreciated.Why bother to order the parts? Just get some of the LED array cleaning pads and cut them down then stick a couple onto the area indicated for the spacer. Or use scrap plastic bits to do the same job. I have never fitted the OEM bits for this problem.

Mr Spock
10-15-2015, 12:50 AM
I took the bracket that holds the machine to the cabinet and used that.

rdyjnkns
10-26-2015, 01:47 AM
Why bother to order the parts? Just get some of the LED array cleaning pads and cut them down then stick a couple onto the area indicated for the spacer. Or use scrap plastic bits to do the same job. I have never fitted the OEM bits for this problem.I believe that is what the last technician did. They must have worn down. I added some cardboard and electrical tape. Have to check on it this week.

Custom Search