PDA

View Full Version : Error Code SC545 on mpc305


Custom Search


petermuylle
10-14-2015, 09:27 AM
hey guys

I've got an mpc305 with SC code SC545. after reset it's ok for a while, but always return after a day or two.
The fusing unit and thermopile have allready been replaced, but no luck.

Anyone had the same problem, or any other ideas for fixing this?

slimslob
10-14-2015, 02:33 PM
Could be PSU or a line voltage problem, brown out condition. Low line voltage drops low enough that the lamps needs to stay on too long during recovery.

copier tech
10-16-2015, 09:17 AM
I've had reocurring fuser errors on these 305's, if it's a customer I trust or inhouse IT I show them how to reset the error they are always happy for me to share that info.

slimslob
10-16-2015, 03:13 PM
I've had reocurring fuser errors on these 305's, if it's a customer I trust or inhouse IT I show them how to reset the error they are always happy for me to share that info.

Any time I show someone how to reset fusing codes I also tell them not to do more than once in an hour.

Custom Search