PDA

View Full Version : BH-C-280, partial fuzzy print


Custom Search


Hansoon
11-01-2015, 04:50 AM
BH-C-280, partial fuzzy print.

Customer has send me by e-mail a cut out of a A3 size print. Holding the sheet landscape there is a fuzzy part near the trailing edge. Only the last 5 cm or so are transferred properly. I have not seen the machine myself yet and am not sure if the fuzziness starts only in the region of the trailing edge or if this happens also before. Looks to me like a transfer issue and I also don't know yet if this happens already during the 1st transfer or only at the 2nd transfer.

Any ideas or hints where to start to look Monday morning when I go there?

Hans

Custom Search