View Full Version : Error Code BROTHER MFC-j5910dw
Hello ..today we have ..Brother MFC-J5910DW ..if we started this printers it have this error message by french longuage: Initial . Imposs .48
please anyone have any idea to solve this problems ?
Elmtech
11-02-2015, 06:48 AM
Error Code 48
Carriage flat cables or head flexible cable halfway inserted.
Unable to Init. 48 LCD
Step Cause Solution
1 Connection failure of the carriage
flat cables or head flexible cable
Check the connection and reconnect the
corresponding cable(s).
2 Print head defective Replace the head/carriage unit.
3 Main PCB defective Replace the main PCB ASSY.
subaro
11-02-2015, 01:55 PM
Hello ..today we have ..Brother MFC-J5910DW ..if we started this printers it have this error message by french longuage: Initial . Imposs .48
please anyone have any idea to solve this problems ?
The encoder strip needs to be cleaned with a lint free cloth. If the encoder strip gets dirty, many different problems can occur.
Initially thought this was a cheezeball inkjet and just go buy another one, but the specs for this unit is impressive, printing 11x17 with duplex and supports quite a few protocols ect.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.