PDA

View Full Version : konica 361 density problem


Custom Search


DOE
11-04-2015, 01:05 PM
i dont have a service manual for this machine. the konica 361 black and white prints great but copies light. trying to find density or grid adjustment but dont see it. can someone tell me how to get into the tech rep, mode. thanks!!!

copier addict
11-04-2015, 01:34 PM
If it prints fine but copies light, the problem is most likely in the optics or DF setup. Have you cleaned the mirrors and lens under the glass? Start there.

DOE
11-04-2015, 02:02 PM
If it prints fine but copies light, the problem is most likely in the optics or DF setup. Have you cleaned the mirrors and lens under the glass? Start there.
i did clean optics with no improvement.

DOE
11-04-2015, 07:34 PM
i did clean optics with no improvement.
found a youtube video on how to get into the tech rep mode and was able to fix it.

Custom Search