View Full Version : Konica Minolta Bizhub 211 dirty page
Orion2010
11-10-2015, 10:19 AM
hello to all,
i have konica minolta bizhub 211, i change drum, blade , developer (DV 110) but if i copy i have stain in page 3121231213 any idea ?
thanks
keegan@kmzn.co.za
11-10-2015, 12:54 PM
Good afternoon
few questions did you run TCR sensor adjust after changing parts and when you changed did you replace the whole unit or just drum / dev
and have you tried changing transfer roller as well normally the problem would persist if the unit has not been replaced or TCR sensor adjust has not been run
one thing to also look at the first image is not to clear but it also looks like there are marks being left from fuser.
allan
11-10-2015, 01:31 PM
Did you vacuum out the cleaning unit?
Did you clear the life counters.
Did you do ATDC?
Don N.
11-10-2015, 01:59 PM
Very hard to see, but fuser?
Sent from my Nexus 5 using Tapatalk
copier addict
11-10-2015, 02:10 PM
You said it happens when you "copy". Does it also happen when you print?
Orion2010
11-10-2015, 02:22 PM
You said it happens when you "copy". Does it also happen when you print?
yes in print and copy
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.