PDA

View Full Version : Bizhub C754e erro C-2151


Custom Search


slytukana
11-13-2015, 07:07 AM
I installed a new bizhub C754e and it is coming up wt this error try changing the second transfer roller bt still the same is a new installation.

Sent from my SM-G360G using Tapatalk

allan
11-13-2015, 10:08 AM
Have a good look at PS-50 and M3 drive.

slytukana
11-15-2015, 05:56 AM
Thanks will try that

Sent from my SM-G360G using Tapatalk

Mr. Joshua
08-04-2017, 08:57 PM
I have one giving this code at about 200k. Gear assembly etc. seems fine. It was a little dry to lubed it up. Have swapped out the transfer roller, M3 motor and PS50 sensor with known good, checked transfer belt output for clog and general ease of turning. Probably going to have to try a PFTDB board next.

Synthohol
08-05-2017, 12:42 AM
have you run load check yet?
http://www.copytechnet.com/forums/attachments/konica-minolta/37275d1501890127-bizhub-c754e-erro-c-2151-a-2151-jpg

Custom Search