konica c280 transfer belt replacement

[DOE]

is there a fuse that will reset transfer belt and are they the same as the c250 fuse. this is for a konica c280. i have never replaced a transfer belt, is there any videos that anyone knows about on how to remove it. i dont have a service manual for this machine. thanks

[antone]

Remove rear right cover disconnect 2 connectors.....remove right door hinge cover 3 screws.....open right door registration unit....remove 2 screws ..unlock transfer belt

[copier tech]

No fuse, you can simply reset it in service mode.

Go to Counter, life, choose new release, highlight fuser, open the front door & press start (it should turn blue)

[edcloss]

I believe on the c280 you reset it in service mode. Choose counter and then new release. Open the front door. Highlight transfer belt and then hit the start button.

[DOE]

No fuse, you can simply reset it in service mode.

Go to Counter, life, choose new release, highlight fuser, open the front door & press start (it should turn blue)
doesnt this take a special tool in order to do it this way?

[copier tech]

No tools are needed, like I said you can simply reset the ITB & fuser counter in service mode.

[DOE]

No tools are needed, like I said you can simply reset the ITB & fuser counter in service mode.
THANK YOU!!!!!