Bizhub 501 fuser wire harness

[mbolduc]

Hi,

I was replacing a broken actuator in the fuser and the jam sensor and connector to wire harness literally fell apart in my hands. I found the sensor and sensor bracket in parts manual but for the 3 wire little harness that goes to the sensor....there is no picture for it. All the parts manual has is a list of wires on a few pages. If anyone has gone thru this and knows the part I am looking for...please help.

Thanks

Mark

[blackcat4866]

If it were me, I would go out to the graveyard and harvest a few matching connectors and some wire of the right gauge and make my own harness, quick as you please. Just lay out the old one as a template. =^..^=

[mbolduc]

If it were me, I would go out to the graveyard and harvest a few matching connectors and some wire of the right gauge and make my own harness, quick as you please. Just lay out the old one as a template. =^..^=

I found the part number by looking in BH500 manual.

50GA90140 in case someone needs it.

[ni311]

I wonder how long it will take for this connector to arrive...