PDA

View Full Version : Konica 7033 - Printer Board


Custom Search


jlvkfyang
06-11-2008, 09:56 PM
We were having problems printing to our 7033. It was not responding to pings, but the NIC light was on. Usually if I power off the machine, it works fine, but not this time.

I reset the printer board per instructions (switch FACT jumper to 2 and 3, power cycle, and switch back to 1 and 2)

Now I am getting a no response from printer board when I put jumper back to 1 and 2. When jumper is at 2 and 3 no error, but no status page printout either.

Any ideas?????

Network cable is fine. Tested connectivity with pc and nic lights at switch are on.

konisolver
06-12-2008, 03:26 AM
You may want to update the cf card then arp the ip with the mac address.

jlvkfyang
06-12-2008, 02:23 PM
what is the cf card??? and how do i update it.

Wouldn't i need to have the status page printed out before I arp the ip to the mac address??? I have the MAC address, and have tried to arp, but nothing.

jlvkfyang
06-19-2008, 07:14 PM
Just posting to bump. Any suggested would be appreciated.

Custom Search