PDA

View Full Version : Konica Minolta C452 colors on 11x17 autocad drawings not lining up


Custom Search


Rylac
01-04-2016, 06:27 PM
These are supposed to be line drawings, but the lines and text on the right side only have cyan, or magenta shadowing. The shadow is to the right if the lines.
So far I have replaced the ITB, all of the imaging units. I tried adjusting the color registrations but they just shift you a different area(where it would not typically be affected).
This also only happens on the second page and on. Three first page looks perfect.

I'm really at a loss here. Any info would be greatly appreciated. Thanks in advance.
-Ryan LaCoss

Custom Search