PDA

View Full Version : Konica Minolta C452 colors on 11x17 autocad drawings not lining up


Custom Search


Rylac
01-08-2016, 02:03 PM
I have a konica minolta c452 and when printing blue prints on 11x17 lines and words on the right side off the page are showing up with a magenta shadow on some, and cyan on others.
The first page of the job prints out perfectly, no shadows our anything, but the pages after that usually have this issue.
The problem is also sporadic. Some will print fine, and others with the issue.
If anyone has any info, or has run into something similar, any direction would be greatly appreciated.
I also have samples if necessary.
Thanks in advance.
Ryan LaCoss

Custom Search