View Full Version : konica 361 jams when duplexed.
konica 361 black and white that jams occasionally when duplexing. when it does jam the lead edge is off 1 to 2 inches on the 2nd side. one sided copying seams fine. do i have a clutch that needs replaced? thanks for your advice
antone
01-10-2016, 02:14 AM
Yes .in duplex unit ...I think 2 are in their
MINOLTAMAN1
01-11-2016, 01:46 AM
There are 2 Mylars at the entrance to the duplex unit. I have seen those get notched and torn snagging papers as they enter the duplex unit. I would trim out the cut or just remove them altogether.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.