LinxTech
01-12-2016, 10:06 AM
Hello techs,
I have one 6501 with trays 1 & 2 not lifting paper stack.
Sensors work in I/O Check.
When inserting tray, tray 3 lifts the paper stack and works fine. Trays 1 & 2 won't do anything and you can't hear any sound from the motors.
I've checked the ICPs on PRCB and they are OK.
Any advice anyone could give?
I have one 6501 with trays 1 & 2 not lifting paper stack.
Sensors work in I/O Check.
When inserting tray, tray 3 lifts the paper stack and works fine. Trays 1 & 2 won't do anything and you can't hear any sound from the motors.
I've checked the ICPs on PRCB and they are OK.
Any advice anyone could give?