PDA

View Full Version : Miscellaneous Is kip 7170 same as kyocera 4820w


Custom Search


kyogenius
01-15-2016, 10:01 AM
Have recently noticed that these models look exactly the same .is the kip 7170 same rebranded kyocera 4820w

antone
04-06-2017, 03:37 PM
Trouble code E801...not in manual

Sent from my SM-N920V using Tapatalk

allan
04-06-2017, 04:56 PM
"Failure is not an option!"
Its a choice.

antone
04-06-2017, 05:13 PM
Sorry E0801...toner density....not y...it came up

Sent from my SM-N920V using Tapatalk

blackcat4866
08-24-2017, 01:51 AM
Nope. E081 is toner density.

I'm thinking that E801 is something to do with memory capacity. When my enduser sends 54 pages at ~1/2M each, it locks up during the first page and must be shut down to clear. The corrupt job remains in the queue until it is deleted. If my enduser sends 35 pages or less it does not occur. Maybe there's a limit to how many pages that the queue will hold?

Does anybody have a definition of this code? It doesn't appear in my manual. The only reference I can find is "Other Service Codes not listed in the manual", and refers to three bulletins that I don't have. =^..^=

Woxner
08-24-2017, 02:22 AM
do you think it could be e801 transfer chrarge

blackcat4866
08-24-2017, 01:33 PM
do you think it could be e801 transfer chrarge

It seems unlikely, since it seems to hinge on how many pages or how many MB. =^..^=

Woxner
08-25-2017, 01:23 AM
this is a toner density error

Wires: 1 Is the wire between Toner Density
Sensor and PW13420 PCB connected
properly?
No Connect it properly.
Density Sensor
(PH11)


2: Can you fix the problem if you replace
Density Sensor?
No Replace PW13420 with a new one

Custom Search