View Full Version : biz 420 error 3201.
I checked gears of fusing are working ok. What else can it be?
allan
02-21-2016, 10:06 PM
Can you rotate the fuser by hand if its turning stiff there could be a problem with the bearings.
If all seems loose enough and change the motor.
ranjitkr16
02-29-2016, 07:03 PM
plz check the fusing motor by load check ,if its working check the pully gear which give drive to fusing unit
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.