mdm7266
06-19-2008, 12:16 AM
Hello, my problem on konica 7050 is the intermittent curled copies at exit.
I have replaced all fixing roll bearings, including the pressure roll bearings.
but same problem exists. have replaced gears on fixing assy.
the paper is curled at exit as if the pressure roll slows down or slip. i'll describe the output copy as wave, or curly.
I have replaced all fixing roll bearings, including the pressure roll bearings.
but same problem exists. have replaced gears on fixing assy.
the paper is curled at exit as if the pressure roll slows down or slip. i'll describe the output copy as wave, or curly.