View Full Version : FS-601/BizHub C350

Custom Search

06-19-2008, 04:24 PM
Hello Everyone.

I have a customer with a C350 connected to a FS-601.

when the paper is exiting into the fs-601's output tray the finisher makes a straining noise (stepper motor) and stops with a jam.

I have replaced the exit motor and control board plus checked for mechanical bind all ok.


06-20-2008, 08:41 AM
try to adjust the tension of the 2 belts in the exit-area. there is an screw in center of the metal plate

Custom Search