photocopier.technician
03-09-2016, 07:48 PM
Hi
I am having a problem with a Bizhub C224e. When printing there is a part of the print that repeats itself on the page. As per experience i thought it was the fusing unit but when i stopped the print before it gets into the fusing unit the problem is already there and also the fusing unit rollers are clean. So its not the fusing unit.
Then i checked the drum units all of them seem ok. Even tried to swap cyan with magenta but still same problem. When i removed the transfer belt just after a copy i can see the repeated image on the transfer belt.
Cleaned the lasers and the drum corona
No error codes or warnings
I attached a sample for better understanding the problem.
Please give me your opinion
Thanks
I am having a problem with a Bizhub C224e. When printing there is a part of the print that repeats itself on the page. As per experience i thought it was the fusing unit but when i stopped the print before it gets into the fusing unit the problem is already there and also the fusing unit rollers are clean. So its not the fusing unit.
Then i checked the drum units all of them seem ok. Even tried to swap cyan with magenta but still same problem. When i removed the transfer belt just after a copy i can see the repeated image on the transfer belt.
Cleaned the lasers and the drum corona
No error codes or warnings
I attached a sample for better understanding the problem.
Please give me your opinion
Thanks