PDA

View Full Version : Konica Minolta bizhub c280


Custom Search


Ahmed Bushara
03-21-2016, 07:22 AM
hi. every one i have Skew problem i adjusted from service mode but problem is still any help!

JDR
03-21-2016, 01:45 PM
do you have any malfunction codes ? like P, L or smth ?
Do you have skew on CMY ?

copier addict
03-21-2016, 09:26 PM
Is it skewing off the glass or from the DF or both? If DF only adjust the screw on the right hand hinge. If both, the left front corner of the scanner bed is likely sagging, give it a sharp lift upwards at that corner.
Hope this helps.

wseyller
03-22-2016, 01:19 AM
Happen with internal test prints? Happen with all trays?

Sent from my XT1254 using Tapatalk

iceman490
03-22-2016, 01:53 AM
Could be getting caught by the guide by the registration roller.

Sent from my SM-G920V using Tapatalk

Hansoon
03-22-2016, 06:18 AM
I have pain in my leg. What could it be?

Hans

Ahmed Bushara
03-22-2016, 06:49 AM
skew came when printing test pattern and PC printing.

mo0651
03-22-2016, 02:47 PM
Did you check the paper guides in TRAYS? Transport guides break and pop out. Now that we have done all the work, what have you done?

wseyller
03-22-2016, 10:58 PM
Also check if image is skewed on transfer belt and/or drums. Because you need to determine if it is paper feed issue or skew in image process.

Sent from my XT1254 using Tapatalk

cristachecri
01-08-2018, 02:51 PM
Hello everyone .
I have a Bizhub c280 machine and has a problem: just in COLOR copy / print mode the paper jams. Specifically as in BLACK copy / print mode everything is fine. It is a frustrating flaw and I can not find the solution. Why is this problem only in COLOR mode ? I'm waiting for your answer or a repair method with great interest . Thank you

Custom Search