PDA

View Full Version : konica 750 not printing when pressing start


Custom Search


W242
03-30-2016, 08:08 PM
Konica/bizhub 750 I put an original on the glass or doc feeder and press start and it will say printing, but nothing is happening. I can turn of the main switch for about 5 minutes then turn on and it will usually work again for awhile but goes back to same issue.
Any ideas what is causing this problem?

copier addict
03-30-2016, 10:46 PM
Clean the two sensors under the drum. This is a symptom of a dirty TCSB

LASSSEN
03-31-2016, 11:54 PM
Hi!
first we need more information about your engine as consumable life espicialy the drum and developer
what message is in the lcd

W242
04-01-2016, 05:35 PM
I cleaned the sensors and it seems to be working good now.

I never would have guessed that they could be related to the problem.

Thank you!

copier addict
04-01-2016, 09:19 PM
I cleaned the sensors and it seems to be working good now.

I never would have guessed that they could be related to the problem.

Thank you!

Thanks for letting us know that you got it fixed.

Custom Search