View Full Version : konica 750 not printing when pressing start
Konica/bizhub 750 I put an original on the glass or doc feeder and press start and it will say printing, but nothing is happening. I can turn of the main switch for about 5 minutes then turn on and it will usually work again for awhile but goes back to same issue.
Any ideas what is causing this problem?
copier addict
03-30-2016, 09:46 PM
Clean the two sensors under the drum. This is a symptom of a dirty TCSB
LASSSEN
03-31-2016, 10:54 PM
Hi!
first we need more information about your engine as consumable life espicialy the drum and developer
what message is in the lcd
I cleaned the sensors and it seems to be working good now.
I never would have guessed that they could be related to the problem.
Thank you!
copier addict
04-01-2016, 08:19 PM
I cleaned the sensors and it seems to be working good now.
I never would have guessed that they could be related to the problem.
Thank you!
Thanks for letting us know that you got it fixed.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.