PDA

View Full Version : Konica 7050 J11-3


Custom Search


mdm7266
06-25-2008, 01:35 PM
Hello there! My problem on konica 7050 is jamming on tray 1 and tray 2, long or short bond paper. i have checked the bearings and replaced feed rollers and take away rollers. the paper stops on the upper side before the paper enters the switch on top. code is J11-3 for tray 1 and J11-4 for tray 2. as if the paper cant go up.

LY3IJ
06-26-2008, 07:09 AM
try replacing one-way gear near the clutch
dont remember the part name

Custom Search