View Full Version : CQ BH500 vertical lines PRINT ONLY
GeorgeK
04-13-2016, 09:14 AM
Appreciate your help.
On a bizhub 500 I have the intermittent vertical lines (as per attachment) only in printouts.
Copies are just fine.
Any suggestions ?
Thanks in advance for your help.
Synthohol
04-13-2016, 12:02 PM
i would check the drum surface, can you print a blank 11x17 or A3 to see if the marks repeat?
DigiMan
04-13-2016, 04:59 PM
Had the exact same thing on a bh 283.
No (obvious)marks on drum but changing the drum resolved the issue.
After 20-30k exactly the same,only guess was that the dev tank was causing it.
Changed the drum again and haven't had a problem since.Weird.
Try to swap a drum from another machine if possible.
bennier2004@yahoo.com
04-13-2016, 10:19 PM
After checking drum.....i would check the laser assembly
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.