PDA

View Full Version : c220


Custom Search


CrapAimer
04-19-2016, 09:46 AM
Hi All

Have a C220 which keeps selecting A5 from top tray, have changed the board,fingers and sensor in the back, Tray seems fine, any help appreciated

Thanks
George

EarthKmTech
04-19-2016, 10:46 AM
Hi All

Have a C220 which keeps selecting A5 from top tray, have changed the board,fingers and sensor in the back, Tray seems fine, any help appreciated

Thanks
George

What about the photo sensors on the black plastic block that is spring loaded and has the side guide shaft slide into?

I've had the back guide itself bent back so the shaft misses the sensors.

acusso1234
04-19-2016, 10:55 AM
Sometimes helps regulating the two screws into the slotted holes under the paper contained in the cassette.

habik
04-19-2016, 08:30 PM
As EarthKM Tech suggested have a closer look on that sesor bracket they tend to crack on the long stepscrew!


Sent from my iDon't believe in marketing device using Tapatalk

blackcat4866
04-19-2016, 11:59 PM
As EarthKM Tech suggested have a closer look on that sesor bracket they tend to crack on the long stepscrew!


Sent from my iDon't believe in marketing device using Tapatalk

I'm glad to see that you're back, habik. =^..^=

Bilal
11-23-2016, 08:26 PM
can anyone tell me how can i turn off my finisher as my paper is jamming there and i don't have any use of it though.

Woxner
11-23-2016, 10:28 PM
just unplug the finisher then turn machine back on. agree check metal lever are not bent

blackcat4866
11-23-2016, 11:00 PM
1) power must be off first
2) Unplug bridge from finisher, and finisher from back cover.
3) Remove bridge.
4) power ON.

=^..^=

allan
11-24-2016, 12:01 AM
Its one of my boot stock items. Called "Holder" as per description.

Custom Search