View Full Version : SafeCom??
allan
04-20-2016, 05:24 PM
Any body have experience on Safecom??
Can get the machines embedded.
Michailov
04-29-2016, 08:36 AM
Any of the .."later" series can be embedded.
C353, C365, C364, C364e and C308 series.
They require a SafeCom GO Konica Minolta License and use of DeviceServer.
In order order to 'allow' em to be embedded on the machine you need to;
Create a selfsigned certificate
On the network tab, Enable SSL Only on open API and enable SSL port on the TCP socket tab.
If your question is about the I-Option WebBrowser and embed via that, I'm uncertain but a rule of thumb is that you shoud avoid embedding anythign with it since as to date its anything but stable
/Mich
wseyller
05-01-2016, 03:09 PM
If your not handcuffed to safecom look at Papercut MF. It works great as a embedded solution for Konica Minolta. Also KM now officially supports Papercut.
With the new C308 and similar model you don't have to purchase the I-option as the web browser just needs to be turned on in settings.
Sent from my XT1254 using Tapatalk
allan
05-01-2016, 07:52 PM
Any of the .."later" series can be embedded.
C353, C365, C364, C364e and C308 series.
They require a SafeCom GO Konica Minolta License and use of DeviceServer.
In order order to 'allow' em to be embedded on the machine you need to;
Create a selfsigned certificate
On the network tab, Enable SSL Only on open API and enable SSL port on the TCP socket tab.
If your question is about the I-Option WebBrowser and embed via that, I'm uncertain but a rule of thumb is that you shoud avoid embedding anythign with it since as to date its anything but stable
/Mich
Figured that out the hard way. Now the customer have unexpected costs.
Jip i am stuck with it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.