tech51
04-25-2016, 06:59 PM
I have a 951 which brings up a C1109 code but only when double stapling or when the staple unit runs to the front to empty its staple scraps.
It will do single staple ok but again will code when emptying the scraps.
The paper stacks on to the silver guide, but as soon as the stapler moves to the double staple position it codes up.
In addition it will occasionally jam at position 7218, again with the paper up to the guides.
So far the staple unit has been replaced and the unit cleaned.
The stapler runs freely on its rails and no binding or chattering noises ocurr when the code/jams ocurr.
Any ideas?
Thanks.
It will do single staple ok but again will code when emptying the scraps.
The paper stacks on to the silver guide, but as soon as the stapler moves to the double staple position it codes up.
In addition it will occasionally jam at position 7218, again with the paper up to the guides.
So far the staple unit has been replaced and the unit cleaned.
The stapler runs freely on its rails and no binding or chattering noises ocurr when the code/jams ocurr.
Any ideas?
Thanks.