copyman
04-25-2016, 09:01 PM
I haven't been out to look at machine but customer said the ADF will suddenly stop working. When they try to use ADF a message shows on display, something like "this feature cannot be used at this time". Sounds like it is isolated. They can get it to work again by turning machine off and back on. ADF may work for a few hours or even a few days before locking up again.
NO codes showing. Not sure about if codes show in service mode. I will check when I go there.
Anyone ever see anything like this?
Thanks in advance
NO codes showing. Not sure about if codes show in service mode. I will check when I go there.
Anyone ever see anything like this?
Thanks in advance