PDA

View Full Version : CQ bizhub C350:2nd copy and on, blur.


Custom Search


DrMark504
05-12-2016, 03:56 PM
First copy is fine second copy and on, has slight blur coming from hesitation on transfer belt showing intervals of image unit spacing on copy. No drag detected from fuser or intermediate transfer belt assembly no damaged gears or broken gear teeth if this were the case first copy would blur to. but first copy exits fine and all remaining copies have transfer belt hesitation.Dr. Mark, Baltimore

DrMark504
05-12-2016, 04:19 PM
Cancel request. Problem solved. Drive problem found in fuser.

Custom Search