View Full Version : Electrical error code C-E002/E006 on bizhub 950
marlon29
06-02-2016, 08:18 AM
Hi guys,
we have a problem on the model Bizhub 950. It displays the error code C-e002/e006 when making copies. We have replaced the OACB and loaded the firmware but still same problem we got.
Any suggestions you can give?
regards,
Marlon29
tulintron
08-28-2019, 09:35 PM
Hi guys,
we have a problem on the model Bizhub 950. It displays the error code C-e002/e006 when making copies. We have replaced the OACB and loaded the firmware but still same problem we got.
Any suggestions you can give?
regards,
Marlon29Forgive me for resurrecting a dead topic.
But I have the same problem and I can't find answers ...
Please help me.
Thanks.
Synthohol
08-28-2019, 10:41 PM
SM says Confirmation of the wiring harness and the connector PCI relay board (PCIRB) IC board (ICB) Overall control board (OACB)
not a lot to go on there.
just to ask, have you traced the whole harness and cut all zipties?
maybe change the PCIRB?
what have you done?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.