View Full Version : How to restore bh-C350 default service code
Hi,
Does anyone know how to get back the default service code on a bizhub C350?
Thx.
chuckt528
06-30-2008, 09:59 PM
Service code or admin password?
Thanks for your response,
I mean the service code for entering the tech rep mode.
ni311
07-02-2008, 06:53 PM
Can you enter in service mode or you don't know the password?
Hi ni311,
I cannot enter the Service Mode cause the Default Password (00000000)was changed by a previous technician.
According to the manual, a new control board (PWB-MC) has to be replaced if password lost but I haven't that board in hand so I want to find a way to initialized the board.
Thanks.
popcornpuppy
07-18-2008, 09:50 PM
try turning it on with the utility button held down, usually brings up trouble reset but i'm not sure about CE password, worth a try. updating the firmware may also reset it
Thank you for you help.
I had contacted the authorized dealer. They offered me a reasonable price for replacing the NVRAM. So I decided to let them go to deal with it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.