PDA

View Full Version : How to restore bh-C350 default service code


Custom Search


deep
06-30-2008, 10:57 PM
Hi,
Does anyone know how to get back the default service code on a bizhub C350?

Thx.

chuckt528
06-30-2008, 10:59 PM
Service code or admin password?

deep
06-30-2008, 11:21 PM
Thanks for your response,

I mean the service code for entering the tech rep mode.

ni311
07-02-2008, 07:53 PM
Can you enter in service mode or you don't know the password?

deep
07-02-2008, 09:47 PM
Hi ni311,

I cannot enter the Service Mode cause the Default Password (00000000)was changed by a previous technician.

According to the manual, a new control board (PWB-MC) has to be replaced if password lost but I haven't that board in hand so I want to find a way to initialized the board.

Thanks.

popcornpuppy
07-18-2008, 10:50 PM
try turning it on with the utility button held down, usually brings up trouble reset but i'm not sure about CE password, worth a try. updating the firmware may also reset it

deep
07-20-2008, 09:53 AM
Thank you for you help.

I had contacted the authorized dealer. They offered me a reasonable price for replacing the NVRAM. So I decided to let them go to deal with it.

Custom Search