Bodi79
06-03-2016, 10:48 AM
Hello there !
I would appreciate any help with the Error Code i am getting on our C6500.
Since yesterday we are getting constant J-3202 even after the first printed Page, i did some research on the Forum and found an old thread about it.
But still couldnīt solve my Problem.
Checked the Fuser Exit Sensor and the Actuator which seem fine.
Aswell replaced the Exit Rollers which were worn down.
If i print a page 80gsm plain paper (color copy) the paper exits the finisher but still the error J-3202 comes up. Before i replaced the Rollers the paper was only exiting a few centimeters or got stuck in the finisher.
Hopefully somebody could help me out, cause the C6500 isnīt under service in Austria anymore so i am left to my own devices.
Got the service manual aswell some replacement parts.
I would offcourse even pay for help if necessary... really desperate cause i need to finish several color jobs.
Thanks in advance
Ronald
I would appreciate any help with the Error Code i am getting on our C6500.
Since yesterday we are getting constant J-3202 even after the first printed Page, i did some research on the Forum and found an old thread about it.
But still couldnīt solve my Problem.
Checked the Fuser Exit Sensor and the Actuator which seem fine.
Aswell replaced the Exit Rollers which were worn down.
If i print a page 80gsm plain paper (color copy) the paper exits the finisher but still the error J-3202 comes up. Before i replaced the Rollers the paper was only exiting a few centimeters or got stuck in the finisher.
Hopefully somebody could help me out, cause the C6500 isnīt under service in Austria anymore so i am left to my own devices.
Got the service manual aswell some replacement parts.
I would offcourse even pay for help if necessary... really desperate cause i need to finish several color jobs.
Thanks in advance
Ronald