PDA

View Full Version : Bizhub 367 Transfer Roller Counter Blues


Custom Search


Korodore5
06-16-2016, 12:00 PM
Can anyone offer some advice please... I've installed a few bits including a new transfer roller into our mono Bizhub 367e (actually it's a Develop badge of the same machine). Problem is that when I go into [service mode] > [Counter] > [Life] to reset the roller's counter in the usual way tap to highlight and press C, I can't select/highlight [Transfer Roller Unit] it to clear the count. So the machine is working, but constantly nagging that the roller needs replacing soon.

Any help much appreciated!

wseyller
06-16-2016, 01:59 PM
I think you have to do New Release which require opening front door then pressing start clear when it turns blue

Sent from my Nexus 6P using Tapatalk

Korodore5
06-16-2016, 03:58 PM
I think you have to do New Release which require opening front door then pressing start clear when it turns blue


Thank you wseyller, that got it! Thank you very much for helping! :D

Custom Search