View Full Version : KM C451 Disable Staple Unit
Sunrise
06-17-2016, 04:21 PM
I remove Staple unit from Finisher but still show error on machine is there anyway to disable staple unit from service mode to stop error on machine.
thanks
habik
06-17-2016, 07:31 PM
What error code you getting?
Byting on bits.
allan
06-17-2016, 09:30 PM
The the bearing housing on those staple units used to break.
Go to service mode and system 1 - trouble isolation and set the staple unit.
Or fix it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.